top of page

Browse Our Lineup

All of our products meet the latest NFPA, UL, and EUSERC standards, as well as comply with local authority-having jurisdictions.  We proudly partner with LS Electric and utilize their components in our products.  To meet your project deadlines, speed and off-the-shelf availability are our priority.

Our products are created with simple modularity, installation, and maintenance at the forefront.  We make it easy from start to finish.

UL891-Compliant Switchboards

UL891 "Speedyboard"

EUSERC utility metering sections and merchandised switchboards.

Mammoth Board

Customized switchboard solutions are also available.

UL67-Compliant Panelboards

UL67 Panelboard

For lighting panels and smaller distribution feed panels in commercial facilities.

LS Electric Logo

Product Information

APPLICATION
Suitable for use as service entrance equipment on AC systems, our sections contain metering compartments, barriers, main disconnects, distribution panels, neutral buses, and grounding provisions.


METERING
The C/T metering compartment comes with two configurable, 15-inch meter doors or a single 30-inch dual-meter door. Door selection is dependent on EUSERC utility.
Incoming cable lugs are for top or bottom feed with one twin-conductor 2 AWG–600 KCMil lug per phase and neutral; suitable for aluminum or copper cables. A single-conductor lug option is also available.


MAIN
The main breaker provides the following options: UTS400, -600, -800, or -1200. UTS400-800 breakers utilize standard trip units. UTS1200 breakers offer optional advanced electronic trip units and neutral C/T devices.


BRANCHES
The distribution bus is rated up to 1600 amps and provides mounting space for UTS150-800 (800-amp maximum) circuit breakers.


For solar applications, a back-fed MCCB configuration is available with an additional bolt-style disconnect.


ENCLOSURE
The enclosure (front accessible only) is finished with a lovely ANSI 49 gray power coat. The dimensions (H x W x D) are as follows:

  • Indoor (Nema 1): 90 in x 38 in x 24 in

  (2.3 m x 1.0 m x 0.6 m)

  • Outdoor (Nema 3R): 90 in x 38 in x 35 in

  (2.3 m x 1.0 m x 0.9 m)

Specifications

  • Hot sequence utility compartment per EUSERC requirements

  • Up to 600 VAC

  • Maximum of 1200 amps

  • Two panel types available:

    • Utility-service disconnect (up to six service disconnects)

    • Group-mounted distribution (standalone or add-on)

  • Single-service disconnect; circuit breaker rated for 400, 600, 800, or 1200 amps with LS Electric 45x interiors, and an SCCR of 65 kA @ 480 VAC. 100% rated breakers also available

  • Three layouts for meter doors offered:

    • Single 15-inch door with one meter socket and test block space

    • Dual 15-inch doors, each with one meter socket and test block space

    • Single 30-inch door with two meter sockets and test block space

  • Meter sockets can be 6-, 8-, 13-, or 15-jaw ring type, based on application

  • Accessories include the following:

    • Underground pull sections with and without lug landings

    • Padlock hasp attachments

    • Sub-feed circuit breakers with distribution section

    • Loadside wireway (available upon request)

    • ERMS switch (where required)

    • Power meters and SPDs

bottom of page